When Should You Upgrade Your Industrial Automation System? 7 Signs to Look For
An industrial automation system can keep a production process running for many years. That does not mean the system will always remain easy to maintain, support or expand.
You may start noticing small changes first. A fault takes longer to diagnose. A replacement component becomes difficult to source. Connecting a new piece of equipment takes more work than expected. Your operators have limited information about what’s happening on the plant floor.
None of these issues, on its own, means you need to replace the whole system.
The bigger concern is when several start appearing together.
So, when should you upgrade your industrial automation system? Look at the condition of the equipment, how much effort goes into maintaining it, how well it works with newer equipment and whether it still gives your operation the control and information it needs.
Here are seven signs worth taking seriously.
7 Signs Your Industrial Automation System May Need an Upgrade
1. The same faults keep coming back
An occasional fault is part of running industrial equipment. A fault that keeps returning is different.
If operators are repeatedly resetting machinery, technicians are repairing the same components, or a problem takes longer to diagnose each time, look beyond the individual fault.
The cause could be the PLC, I/O, wiring, power supply, HMI, communications or another part of the control system. Replacing one component without checking the wider system may only deal with the symptom.
Pay attention to the pattern. If faults are becoming more frequent or are taking production offline for longer, it may be time to assess whether the existing control system is still practical to maintain.
For businesses already dealing with recurring control problems, Exxus provides PLC programming and control system services to diagnose, modify and support industrial automation systems.
2. Finding replacement parts is becoming difficult
An older automation system can work perfectly well until a critical component fails.
That’s when obsolete hardware becomes a much bigger concern.
If your PLC, I/O modules, HMI or other control equipment is becoming difficult to source, you need to think about what happens when the next failure occurs. Waiting several days or weeks for a particular component may have a much greater impact than the original repair cost.
It is worth checking the availability of the parts that would cause the biggest disruption if they failed.
Ask yourself:
- Can critical components still be sourced?
- Are suitable replacements available?
- Would a replacement work with the existing system?
- Is the software still supported?
You don’t necessarily need to replace an entire system because one component is approaching the end of its life. But if several critical parts are becoming difficult to support, planning an upgrade before a failure leaves you with fewer options.
3. New Equipment Is Hard to Integrate
Adding new machinery should not turn every change into a major control-system exercise.
Yet this can happen when a newer machine has to communicate with an older automation system that wasn’t designed to accommodate it.
You might run into limitations with communications, available I/O, controller capacity or the way information is displayed to operators. Small additions can then require workarounds that make the overall system harder to manage.
This is where industrial automation modernisation can become useful.
Rather than replacing everything, you can assess the existing controls and determine what needs to change to accommodate the new equipment.
Exxus works with PLC systems, SCADA and HMI systems, control panels and related automation requirements, so an upgrade can be considered in the context of the wider control system rather than as an isolated hardware change.
4. Maintenance is taking longer than it used to
Look at how much time your team spends keeping the system going.
A single repair may not cost much. But repeated troubleshooting, sourcing older components and working around limitations can gradually consume a significant amount of maintenance time.
You may notice that technicians are spending longer tracing faults or that only one person on the team is comfortable making changes to the older PLC program.
Documentation can also become an issue. If drawings and control-system information no longer reflect what’s installed, fault-finding becomes slower and modifications carry more risk.
That doesn’t mean every maintenance problem calls for an upgrade. It does mean the system is worth reviewing when maintenance has become increasingly reactive.
Exxus also provides technical support and control-system services for businesses that need help maintaining or modifying existing automation systems.
5. Operators Lack Useful Information
A control system can keep machinery running while still leaving operators with limited visibility.
For example, they may know that a machine has stopped without having enough information to see what caused the problem. Historical information may also be difficult to access, making it harder to identify recurring issues.
This is where the HMI and SCADA side of an automation system matters.
A suitable upgrade could improve how operators see faults, monitor processes and access useful operational information without necessarily replacing the main controller.
Exxus provides SCADA and HMI solutions along with management information capabilities such as downtime reporting, custom reporting and data historians.
The important question is what your operators actually need to see and how that information can help them respond more effectively.
6. Expansion Is Getting Harder
Your production requirements can change faster than the control system underneath them.
A new machine, additional process or change in production can expose limitations that were never a problem when the original system was installed.
For example, there may be limited room for additional I/O or the existing controller may not have the capacity required for further changes. Integrating another machine might also involve more engineering work than expected.
Before continuing to add workarounds, look at whether the current architecture can support what you are planning.
Sometimes the answer will be a targeted modification. In other cases, an upgrade to an industrial automation system project may be the more sensible route.
The earlier you assess the limitation, the more options you generally have for planning the work around your operation.
7. The System Is Hard to Support
This is one of the quieter warning signs.
The machinery may still run. The PLC may still control the process. But when a fault appears, your team has to rely on one person’s memory because drawings are outdated or previous changes were never properly recorded.
That creates a support problem.
Good documentation gives technicians something reliable to work from when they need to troubleshoot, modify or commission equipment.
It also makes an upgrade easier to plan because you have a clearer picture of the existing installation.
As part of its control-system work, Exxus provides PLC logic drafting and documentation as well as testing, commissioning and operator training.
Do You Need an Upgrade or Just a Repair?
This is where the decision can become less straightforward.
An ageing system doesn’t automatically need replacing. If it remains reliable, parts are available, and it continues to meet the requirements of the operation, keeping it in service may be perfectly reasonable.
The situation changes when several warning signs appear together.
What you’re seeing | What to consider |
One isolated fault | Repair may be sufficient |
Repeated control faults | Investigate the wider system |
Obsolete components | Start planning ahead |
New equipment is difficult to integrate | Review the control architecture |
Maintenance is becoming reactive | Assess long-term supportability |
Poor operator visibility | Review HMI or SCADA requirements |
Expansion is being restricted | Consider an automation upgrade |
The aim is to solve the actual problem rather than replace equipment simply because it has been operating for a long time.
What Does Industrial Automation Modernisation Actually Involve?
Modernisation does not necessarily mean removing the entire existing system.
A targeted upgrade may involve changing a particular component while retaining equipment that remains suitable.
A broader industrial automation modernisation project may involve changes to the PLC, HMI, SCADA, control panels, programming or documentation, depending on what the existing installation needs.
Full replacement is a different decision. It may be appropriate when the existing architecture is difficult to support or cannot accommodate the requirements of the operation.
The right scope should come from an assessment of the existing system, rather than starting with a predetermined list of equipment to replace.
What Should You Check Before Upgrading?
Before choosing new equipment, establish what is already on site and why the upgrade is being considered.
Start with the existing PLC, HMI, SCADA, I/O, control panels and associated documentation. Then look at the faults, maintenance history, component availability and integration issues that are affecting the operation.
Most importantly, define what you want the upgraded system to achieve.
Perhaps you need easier troubleshooting. Maybe replacement parts have become a concern, or a planned expansion requires more control capacity. The reason for the project should shape the scope.
It is also worth planning how the upgraded system will be tested and commissioned before the work begins. Exxus Electrical and Automation provides factory acceptance testing and simulation as well as site commissioning and documentation.
Don’t Wait for a Breakdown to Start the Conversation
If a critical PLC or control component fails without warning, you have fewer choices.
The immediate priority becomes getting the equipment running again. There may be little time to assess alternatives, plan modifications or schedule commissioning properly.
A planned assessment gives you time to identify vulnerable parts, consider upgrade options and decide what can remain in service.
That doesn’t mean every older automation system needs immediate modernisation.
It means you can make the decision while the system is still operating rather than having a breakdown make it for you.
Industrial Automation Upgrade Services From Exxus Electrical and Automation
Exxus Electrical and Automation provides industrial automation and control-system services across Western Australia.
Its capabilities include PLC programming, SCADA and HMI systems, control panels and switchboards, automation upgrades, technical support, documentation, factory acceptance testing and commissioning. Exxus also provides management information systems for areas such as downtime reporting, custom reporting and data historians.
If your existing automation system is becoming harder to maintain, integrate or support, reviewing the current setup is a sensible first step.
You can learn more about Exxus Electrical and its automation capabilities or contact Exxus to discuss your requirements.
FAQs
Can an automation upgrade be completed while production continues?
In some situations, parts of the preparation and testing can be completed before site work begins. The practical approach depends on the equipment, process and scope of the project, so the changeover needs to be planned around the specific installation.
How can I reduce disruption during an automation upgrade?
Start by defining the scope before work begins. Existing documentation, PLC programs, drawings and equipment information can help the engineering team prepare the changes and plan testing and commissioning more effectively.
What information should I give an automation company before requesting an upgrade?
Useful information includes the existing PLC and HMI details, control-system drawings, relevant programs or backups, equipment specifications and a description of the faults or limitations you’re experiencing. Information about planned changes to the process can also help define the scope.
What is the difference between automation maintenance and modernisation?
Maintenance deals with keeping the existing system operating and correcting faults. Modernisation involves making planned changes to the system so it can better meet current operational requirements or address limitations in the existing setup.
When is the best time to assess an ageing automation system?
Before a critical failure or major expansion is usually preferable. An early assessment gives you time to understand the condition of the existing system and plan any required work without making decisions during an unexpected shutdown.